What is Ulti-Plex Technology?

Ulti-Plex Technology is Patented, breakthrough technology that allows Repair Mode serum to penetrate the nails, interact with nail keratin, and create new bonds.

How does Repair Mode repair broken keratin bonds?

Repair Mode repairs from inside via biomimicry of nail’s natural keratin. This serum contains Patented Ulti-Plex Technology that penetrates from within the nail recreating protein bonds in the nail.

I do my nails at home and like to keep my nails coated.Can I use Repair Mode under my OPI Lacquer shades or treatments?

Yes, you can use Repair Mode as a Prep Booster with your OPI Lacquer shades or Nail Envy. Apply 2 coats of Repair Mode to clean, bare nails, and prep those nails prior to lacquer application.

I like to go to the salon and have my nails done, can my nail pro use Repair Mode under my OPI salon services?

Yes, your nail pro can use Repair Mode as a Prep Booster under your OPI salon services.

Can I use Repair Mode while I have an OPI product on?

Repair Mode can be used on visible new nail growth while you are wearing your favorite OPI products.

What is different about Nail Envy Strengthener in comparison to Original Nail Envy?

The Nail Envy formula has been updated with new Tri-Flex Technology, which consists of 3 resins that form a supportive layer onto the surface of the nail, adding strength.

Nail Envy Strengthener and Nail Envy Color utilize Tri-Flex Technology. What is Tri-Flex Technology?

Tri-Flex Technology is the combination of 3 resins-nitrocellulose, epoxy resin, and acrylate resin. These create a liquid shield when applied and reinforce the nails with layer-building strength.

Strengthener under Nail Envy Color or other OPI lacquers?

Yes, Nail Envy Strengthener makes a great strengthening base coat under Nail Envy Color or OPI lacquer shades. It not only provides strength, it also provides a barrier to protect nails from any discoloration.

Can I use Nail Envy Strengthener with Repair Mode?

Nail Envy can absolutely be used over Repair Mode, but make sure you wait 10 minutes between each application! For best results apply 2 coats of Repair Mode before prepping nails, then clean nails and apply your favorite Nail Envy Strengthener.

Why was formaldehyde removed from the treatment’s formulas?

OPI treatments were reformulated to remove formaldehyde and several other ingredients, creating more globally compliant products that meet the 9-free benchmark. ?

How do I properly prep the nail?

Begin by pushing back the cuticles and cleaning the nail plate - removing any hangnails or dead tissue. Cleanse the nails with OPI Expert Touch Nail Wipe saturated with N.A.S 99 Nail Cleansing Solution to get perfectly prepped nails.

Why do I get bubbles in my manicure?

For best nail art results, always allow each coat to dry before applying the next coat of Nail Lacquer. If the previous coats are still wet, they will continue to dry under the new coat of polish, resulting in air bubbles getting trapped in between.

Why does my Nail Lacquer get thick?

Nail Lacquer contains solvents which evaporate with use and cause your nail polish to get thick. Use Nail Lacquer thinner to replace the evaporated solvents and you're good to go again!

How do I remove cuticle flooding?

Easily remove Nail Lacquer nail polish from the skin by dipping a brush or Q-tip into Expert Touch Lacquer Remover and cleaning around the cuticle to remove excess nail polish.

Why is my Nail Lacquer nail polish streaky?

Make sure to apply OPI Nail Lacquer using the Three Stroke Method to avoid streaking and create an even application. Start by taking enough color on the brush for your three stokes, but not too much to flood the cuticles. Apply on center then sides.

How do I properly prep the nail?

Begin by pushing back the cuticles and cleaning the nail plate - removing any hangnails or dead tissue. Cleanse the nails with OPI Expert Touch Nail Wipe saturated with N.A.S 99 Nail Cleansing Solution to get perfectly prepped nails.

Why do I get bubbles in my manicure?

For best nail art results, always allow each coat to dry before applying the next coat of Nail Lacquer. If the previous coats are still wet, they will continue to dry under the new coat of polish, resulting in air bubbles getting trapped in between.

Why does my Nail Lacquer get thick?

Nail Lacquer contains solvents which evaporate with use and cause your nail polish to get thick. Use Nail Lacquer thinner to replace the evaporated solvents and you're good to go again!

How do I remove cuticle flooding?

Easily remove OPI Nail Lacquer nail polish from the skin by dipping a brush or Q-tip into Expert Touch Lacquer Remover and cleaning around the cuticle to remove excess nail polish.

Why is my Nail Lacquer nail polish streaky?

Make sure to apply OPI Nail Lacquer using the Three Stroke Method to avoid streaking and create an even application. Start by taking enough color on the brush for your three stokes, but not too much to flood the cuticles. Apply on center then sides.

How do I properly prep the nail?

Begin by pushing back the cuticles and cleaning the nail plate - removing any hangnails or dead tissue. Cleanse the nails with OPI Expert Touch Nail Wipe saturated with N.A.S 99 Nail Cleansing Solution to get perfectly prepped nails.

Why do I get bubbles in my manicure?

For best nail art results, always allow each coat to dry before applying the next coat of Nail Lacquer. If the previous coats are still wet, they will continue to dry under the new coat of polish, resulting in air bubbles getting trapped in between.

Why does my Nail Lacquer get thick?

Nail Lacquer contains solvents which evaporate with use and cause your nail polish to get thick. Use Nail Lacquer thinner to replace the evaporated solvents and you're good to go again!

How do I remove cuticle flooding?

Easily remove OPI Nail Lacquer nail polish from the skin by dipping a brush or Q-tip into Expert Touch Lacquer Remover and cleaning around the cuticle to remove excess nail polish.

Why is my Nail Lacquer nail polish streaky?

Make sure to apply OPI Nail Lacquer using the Three Stroke Method to avoid streaking and create an even application. Start by taking enough color on the brush for your three stokes, but not too much to flood the cuticles. Apply on center then sides.

How do I properly prep the nails?

Begin by pushing back the cuticles and cleaning the nail plate - removing any hangnails or dead tissue. Cleanse the nails with OPI Expert Touch Nail Wipe saturated with N.A.S. 99 Nail Cleansing Solution to get perfectly prepped nails.

Why do I get bubbles in my manicure?

For best nail art results, always allow each coat to dry before applying the next coat of Nail Lacquer. If the previous coats are still wet, they will continue to dry under the new coat of polish, resulting in air bubbles getting trapped in between.

Why does my lacquer get thick?

Nail Lacquer contains solvents which evaporate with use and cause your nail polish to get thick. Use Nail Lacquer thinner to replace the evaporated solvents and you're good to go!

How do I remove cuticle flooding?

Easily remove Nail Lacquer nail polish from the skin by dipping a brush or Q-tip into Expert Touch Lacquer Remover and cleaning around the cuticle to remove excess nail polish.

Why is my Nail Lacquer nail polish streaky?

Make sure to apply OPI Nail Lacquer using the Three Stroke Method to avoid streaking and create an even application. Start by taking enough color on the brush for your three stokes, but not too much to flood the cuticles. Apply on center then sides.

How do I properly prep the nail?

Begin by pushing back the cuticles and cleaning the nail plate - removing any hangnails or dead tissue. Cleanse the nails with OPI Expert Touch Nail Wipe saturated with N.A.S 99 Nail Cleansing Solution to get perfectly prepped nails.

Why do I get bubbles in my manicure?

For best nail art results, always allow each coat to dry before applying the next coat of Nail Lacquer. If the previous coats are still wet, they will continue to dry under the new coat of polish, resulting in air bubbles getting trapped in between.

Why does my Nail Lacquer get thick?

Nail Lacquer contains solvents which evaporate with use and cause your nail polish to get thick. Use Nail Lacquer thinner to replace the evaporated solvents and you're good to go again!

How do I remove cuticle flooding?

Easily remove Nail Lacquer nail polish from the skin by dipping a brush or Q-tip into Expert Touch Lacquer Remover and cleaning around the cuticle to remove excess nail polish.

Why is my Nail Lacquer nail polish streaky?

Make sure to apply OPI Nail Lacquer using the Three Stroke Method to avoid streaking and create an even application. Start by taking enough color on the brush for your three stokes, but not too much to flood the cuticles. Apply on center then sides.

How do I properly prep the nail?

Begin by pushing back the cuticles and cleaning the nail plate - removing any hangnails or dead tissue. Cleanse the nails with OPI Expert Touch Nail Wipe saturated with N.A.S 99 Nail Cleansing Solution to get perfectly prepped nails.

Why do I get bubbles in my manicure?

For best nail art results, always allow each coat to dry before applying the next coat of Nail Lacquer. If the previous coats are still wet, they will continue to dry under the new coat of polish, resulting in air bubbles getting trapped in between.

Why does my Nail Lacquer get thick?

Nail Lacquer contains solvents which evaporate with use and cause your nail polish to get thick. Use Nail Lacquer thinner to replace the evaporated solvents and you're good to go again!

How do I remove cuticle flooding?

Easily remove OPI Nail Lacquer nail polish from the skin by dipping a brush or Q-tip into Expert Touch Lacquer Remover and cleaning around the cuticle to remove excess nail polish.

Why is my Nail Lacquer nail polish streaky?

Make sure to apply OPI Nail Lacquer using the Three Stroke Method to avoid streaking and create an even application. Start by taking enough color on the brush for your three stokes, but not too much to flood the cuticles. Apply on center then sides.

How do I properly prep the nail?

Properly prep the nails by pushing back the cuticles, cleaning the nail plate and removing any hangnails or dead tissue around the nail. Cleanse the nails thoroughly with an OPI Expert Touch Nail Wipe saturated with N.A.S. 99 Nail Cleansing Solution.

How do I remove GelColor?

File the free edge and sidewalls to break the seal of each nail using an Edge 240 file. Fully saturate the pad of the Removal Wrap with Lacquer Remover. Wrap each finger securely and soak for 15 minutes. Push off the lifted product from the nail.

Why is my client’s GelColor shrinking?

GelColor can shrink if the application is too thick, apply thinner coats for base coat, shades, and top coat to cure properly.

I applied the 3 step system and it didn’t last 3 weeks. Why is that?

The GelColor system provides up to 21 days of wear when applied to properly prepped nails and according to application instructions Tips for optimum results

• Prep nails properly

• Cap the free edge

• Use with OPI GelColor Base and Top Coat

Why is my GelColor streaky?

Be sure to agitate the product for at least one minute before application to properly distribute the pigments in the formula.

High Shine in No Time

Fast drying top coat designed to complete the Vinylux Long Wear Polish 2-step system. Salon-quality clear polish provides a layer of high shine and durability to manicures and pedicures for 7+ days of wear.